Door panel curtains – Simple curtain rods are best for installing awnings French side curtains should draw the most attention not bars. Measure the length and width of the window frame in one of the French doors. Cut out fabric pieces and iron them flat. HEM long sides of a panel. Take a piece of fabric and folding the side edges a half-inch of cloth on the underside, using a stitching gauge to measure the hem. Iron hem flat. Fold the hem over the back of a half-inch and iron it flat. HEM bottom of a door panel curtains. Fold the bottom of the fabric half-empty against the underside of the fabric and iron it flat.
HEM top of a panel. Fold the top of the shell of a half-inch to the underside of the fabric and iron it flat. Repeat to make the second door panel curtains. Install the bracket for the upper curtain rod. Install bracket for bottom curtain rod. Screw the brackets to the door with drill. Repeat this process for the other door. Push the curtains on rods and put the rods in the brackets. Tighten the screws in the bracket to hold the rods in place using a screwdriver.