Jewelry armoire mirror – A wardrobe is simply an armoire built between wall studs. This armoire is a storage solution because it does not occupy floor space and can be integrated into virtually any wall in your home. Mark the inner edge of two adjacent studs in the wall with a pencil. Spread the two brands you just drew, using a ruler to keep the lines straight. Draw two vertical lines to the desired height of his armoire jewelry.
Align the tip of a drywall saw one of the horizontal lines near its center. Cut through drywall along the four lines using drywall saw. Measure the width, depth and height of the space between the two wall studs using a tape measure. These measurements are the dimensions of your jewelry armoire mirror. Use a circular saw to cut two pieces of plywood 1/2 inches to the width and height of the box. Slide the lower horizontal panel in place between wall studs so it is flush with the bottom of the wall space. Install the side panels vertically between the ends of the top and bottom panels.
12 Photos Gallery of: How to Build a Jewelry Armoire Mirror Recessed
You can install shelves at regular intervals or varying height to accommodate different sizes of jewelry. Cut the shelves for armoire 1/2 inch plywood with a circular saw. Slide the shelves in place horizontally between the side panels. Cut a sheet of plywood 1/2 inch to the total width and height of your jewelry armoire mirror to serve as the closet door. Install two metal hinges along the bottom edge of an armoire door. Keep the closet door against the face of the armoire structure and align the edges. Screw several small metal hooks on the back of wall space about half an inch from the bottom of the top panel. Place trays jewelry box insert on the shelves of his armoire.