Swing arm table lamp is useful lighting options that can be moved depending on where you need to focus light. When the lights are not in use can be folded back against the wall to keep them out of the way. They are often installed next to the beds and chairs next to the room in dens and living rooms. Movable arm lamps installed in exactly the same way as most of the light fixtures.
Select the location of your swing arm table lamp and decide on the vertical placement on the wall. In general, the bottom of the lampshade should be at eye level, which vary depending on the height of the bed or chair that is next. Mark the location with a pencil.
12 Photos Gallery of: Installing a Swing Arm Table Lamp
Call an electrician and have run new wiring in the location you marked. Assemble the swing arm table lamp using the manufacturer’s instructions until you are ready to hang on the wall. Turn off the electricity to the room at the fuse box to avoid injury. Locate the black wire on the back of the lamp. Connect the white wire to white wire lamp on the wall the same way. Push all wiring inside the wall and gently push the base of the lamp arm against the wall. Screw a light bulb in the lamp and then turn the power back into the room.