Orbit chandelier – A lamp is a large lamp, sometimes complicated often lies at the entrance and the dining room of the House more. If a lamp chandelier hanging in the same way as any other house lights is large or small,. The second spider installed and powered the junction box in the ceiling. Installing the new lamp lights or others began with the removal of the spider, which, depending on the size of the spider, often two people.
Remove the screw from the bottom of the escutcheon of the spider, which is part of the orbit chandelier connected to the ceiling. The screw can be seen, or perhaps disguised by decorative ball. Turn the ball to remove the screws that hold the shield in the ceiling. Remove the connecting cable to Earth if it is physically bolted to the junction box. Good grounding wire shielded with green or copper wire. Tuck the wires into the ceiling box then place the lid on the junction box junction box if you do not install the new lamp. If you are installing new lights, you can now install new equipment.
12 Photos Gallery of: Remove Orbit Chandelier Ideas
Remove the mounting screws to secure to junction box. If the lamp is great, having a strong partner holding the orbit chandelier so that it cannot fall. Turn the wire nuts that connect each wire to the left nut until from the cable. A separate cable if they remain bent.