Oval mirrors – First, mark the approximate location of the center of the oval mirror on the wall with a pencil. Second, measure mirror length and width at its widest point and mark the position of each in the middle of the back of the mirror with a pencil. Third, set the position for pasting hardware. Measuring the side that will be vertical when it is mounted on the wall. Divide this measurement with 3 and reproduce the response of 2. Divide the vertical measurement of 2 and subtract the number depends on the last equation.
The measuring this distance up towards the upper part of the oval mirror from the horizontal line when the oval mirror is mounted. Mark this location on the left and right of the frame of the oval mirror. Fourth, screw a small picture hanging eye screw into the frame of the oval mirrors on the marks on the left and right sides of the back of the frame. Fifth, attach each end of the picture hanging wire to the screws on the back of the oval mirror. Sixth, push the wire toward the top of the frame and the measure of the line in the middle of the back of the oval mirror to the center of the wire.
12 Photos Gallery of: To Mount Oval Mirrors in a Bathroom
Measure up the distance from the wall and mark the location of wallboard anchor. Using a 2-inch screw instead of wallboard anchor, if there is a stud. Use the drill with the appropriate screwdriver bit to screw in the self-drilling wallboard anchor. Screw in wallboard anchor screw anchor, leaving a portion of the screw over the wall. Last, hang the oval mirrors on the wall by placing the cord plug in wallboard anchor.