Traverse curtain rods – Although bars polygonal curtain are relatively maintenance free once you have the bar of polygonal curtain installed, you may want to make some small adjustments to it, such as installing a curtain of two panels instead of using a panel. Since you are going to make all the adjustments to the bar with the bar on the wall, you may have to stand on a ladder to get the best possible positioning.
Two panel setting traverse curtain rods, Change the direction “draw” pulling the loop on the side you want him down and roll around until the tightrope change sides. For example, if the draw is now on the right side, pull the loop to the left until the cord was in transfer’s right side to the left side. Make sure the cord tracks remain properly aligned around the rollers, especially in the forehead, or right side of the bar. Pull the draw cord on the right side to move the carrier overlay to the right outer edge of the bar.
13 Photos Gallery of: Two Panel Setting Traverse Curtain Rods
Two panel setting traverse curtain rods gently pull down on the ropes draw on both sides of the bar until the carrier piece sliding overlap stays in place. Move the under lap carrier to the left outer edge of the bar. Placed or loop the rope around the raised tab on the under lap carrier and pull it firmly in place. Pull the draw cord to test the sliding action, both overlap and under lap carrier.