Wall sconce with switch – You can add a stylish wall lamp to highlight any room or hallway in your home. Sconces add creativity and texture and can be useful to be in the living room, dining room, bathroom or kitchen. Sconces mounted 5 to 6 meters from the ground; space of 6 to 8 meters apart if you have more than one, advises the American Lighting Association. Installing a ramp is a fairly simple project. Take precautions, but because you will be working with electricity.
Mark the location of the ramp on the wall with a pencil. Mark the location for the light wall sconce with switch to control the ramp. Turn off the power. Find a junction box. If you cannot find the box, find a container with power. Cut a hole vertically to the cabinet. Cut holes for the horizontal ramp boxes. Run the cable from the socket to the switch. Then enter the switch in the open slot in the wall for the wall sconces.
12 Photos Gallery of: Wall Sconce with Switch Ideas
Drill a hole in the upper ridge of the inside of the wall with a 1 1/2 inch paddle bit. Close the wall sconces. Attach the wire to the boxes. Start with the freshest sconce light and performing an electrical wire to the next wall sconce. Continue with the performance of the wire until you get to the last wall sconce with switch. Insert the wires into the junction boxes. Screw the connection boxes in the wall studs or clamps to use the boxes to the wall. Mount the switch and the switch cover. When you’re done, flick the switch back and forth to check the wiring and wall sconces work well.